Tech Peak » Water Flow Meter: How to Control Water Flow Rate?

Water Flow Meter: How to Control Water Flow Rate?

by Proteus
Water flow controller- Water Flow Meter: How to Control Water Flow Rate?

Water flow control devices are electric devices that monitor and maintain flow rate variables. The devices help control the speed and capacity of the flow-through system. The flow control devices work along with pumps and valves for better results.
To prevent water from going at a higher pressure, the regulator closes on time to ensure a steady pace. As a result, you will perfectly control your water flow rate with water flow regulators. Regulators use a wide range of applications, such as sprinkler systems to tankless water heaters.

Steps to follow in controlling the water flow rate

1. Find your property’s stop cock- A stop cock is what you use to control your main water. The external valve controls the flow from the water main that serves your street to the supply pipe. If you need to control the water flow rate, then you must first find the stop cock.
2. stopcock, then open a half-turn -Turning the valve clockwise will close it, and it reduces the amount of water passing. It, however, takes a few minutes for the water to stop. To turn your water back and control the water flow, open a half turn.
3. Go to the furthest tip.
4. Open the cold tap and check the adequate flow.
5. Adjust the flow rate until suitable.

How water flow regulators work

Engineers design the regulators, ensuring a higher water flow rate lowers when water passes through the regulator. Meanwhile, the regulators range from simple to complex in design. For example, the valve that attaches to the regulator will close slightly to match your desired rate.
The water flow regulator contains a spring, a throttling stem, a cup, and a diaphragm. All these components work together to keep the flow of water at the correct levels. This will help you protect your pipes from high pressure and water surges.

Even though the designs of most pipes are such that they will accommodate a high pressure, the municipality sometimes pumps so much water that it causes damage to the line. However, installing a water flow controller along the waterline won’t have any issues with the high pressure.

Using water flow controller with free chlorine sensors and chlorine dioxide sensors

Free chlorine sensors and chlorine dioxide are beneficial in controlling water flow rate. When you place the sensors with a water flow regulator will provide you with highly free chlorine and chlorine dioxide.
Therefore installing the flow cell with your sensor will maintain a consistent and smooth flow across the sensor membrane. If you do not establish a water flow controller, then the flow of water fluctuates.

The flow of water fluctuations leads to the production of air bubbles along the membrane. These bubbles cause issues with readings from free chlorine. Meanwhile, you can prevent the situation with a water flow controller.
If you are using a free chlorine sensor, this type of sensor uses various applications. Free chlorine exists in multiple solutions, and it is the only chemical that can disinfect water. If you can measure the concentration of free chlorine is essential for such applications as wastewater treatment. Without these measurements, you will not know if the water is adequately disinfected.

Chlorine dioxide sensors are used in disinfection applications. A chlorine dioxide sensor can help you measure the effectiveness of your disinfection technique.

Using valves in controlling the water flow rate

Control valves maintain a constant flow rate regardless of pressure. This means a continuous flow rate, irrespective of fluctuating pressures upstream or downstream of the valve. As a result, flow control valves are simple with no external fluctuation. Flow control valves are available in a wide range of connection types, sizes, and materials.

How the Flow control valves work

Valves use a flexible rubber control ring. The rubber has an open diameter that responds instantly to fluctuations in water pressure. While pressure increases, the opening reduces to maintain the adjusted flow rate. However, as pressure decreases, the diameter opens up to keep the adjusted flow rate.
Valves are suitable for use in challenging water areas and unprocessed water. As the flow controlling element is a rubber material that flexes under regular operation, it minimizes the risk of blockage and reduces the build-up of scale.

Wrapping up

Water flow control devices include Valves and regulators. They help you in such a way that it is easy to control the water flow rate. It enables you to save on costs of repairing pipes bursting due to high water pressure. This topic will guide you on how to control the water flow rate and the importance of the procedure.

You may also like

Leave a Comment