Tech Peak » Safety Rules When Working With Fasteners and Fixing Parts on Them.

Safety Rules When Working With Fasteners and Fixing Parts on Them.

by petersmarypeters784
embroidery bolton

We all know that construction is always an increased risk. Simply due to tools that can pose a threat to human health especially if used improperly. So today we’re going to talk about safety.

Protective clothing

Protective clothing. Black Nitrile Gloves and a face mask are a must if you are drilling a hole or working with a grinder. A flying chip is a dangerous weapon. You should also wear clothes that you do not mind for example, old or specially purchased for such purposes.

Accuracy. Aim carefully when hammering a nail, however, this is already so obvious. But being careful really doesn’t hurt, so if you have clumsy friends who decide to help, be doubly vigilant.

Don’t let the kids in! Children are very fond of all sorts of interesting shiny things, especially screws, bolts and carnations. Even grown up, they can put them in their pocket and inadvertently get hurt.

Carefully check the equipment before operation! If the hammer is loose on the handle. The grinder is loose or the drill is short these things cannot be used.

Timely change temporary elements, such as drills for a drill or discs for a grinder. There is no need to think that it will work again. Especially if the tools have been idle for six months or a year.

Read the instructions!

Mowing grass with a metal disc or cutting rebar with a concrete crusher is dangerous not only for your safety. But also for the lives of those around you. We knew a couple that cut sheets of metal with a wood saw.

Keep your distance. Do not prop up the cabinet that you are fixing with your knee. And it is also not necessary to hold the falling door sideways while it is attached to the anchors.
Well, and finally the last. Choose fasteners correctly!

Hanging something heavy on decorative fasteners or decorating a small box with a heavy anchor hook is the choice of short-sighted people who will regret it.

Clothes for workers. Made from a blended fabric for protection against SMOs
SCANWAY offers high-quality. Overalls made of mixed fabrics to protect against general industrial pollution and mechanical impacts. The high wear resistance and strength of suits made of European fabrics guarantee a long service life > 2 years.

WHAT DOES FABRIC BLEND IN WORKWEAR MEAN?

Blended fabrics are fabrics with a different ratio of natural and synthetic fibers. Cotton provides hygienic qualities of the fabric and polyester (or polyester) gives high performance properties.

Blended fabric is obtained by mixing natural and synthetic fibers, and their percentage determines the properties of the finished material.

Blended fabrics produced by Klopman (Italy) and Carrington (England) have proven themselves in the European and domestic markets. Which are used in the production of SWG overalls for stock assortment and custom-made overalls.

Fabrics of the Italian concern KLOPMAN , composition 35% chl + 65% pe, density 245 g/m² (Indestructible, Milan).
Fabric of the English brand CARRINGTON , composition 33% chl + 67% pe, density 245 g/m² (Tomboy).

RECOMMENDATIONS FOR USE OF WORKWEAR FROM FABRIC BLEND

Workwear SWG made of mixed fabrics Indestructible, Milan, Tomboy – designed to protect against general industrial pollution and mechanical impacts. Recommended for use in production shops logistics centers and warehouses food industry rental companies. Suits are used in areas of enterprises where overalls with increased wear-resistant characteristics are required.

Significant and successful experience in the use of SWG overalls made of mixed fabrics in  foreign enterprises, such as:

Automobile plants GENERAL MOTORS and HYUNDAI, dealerships VOLVO TRUCKS, TOYOTA, DIROL Cadbury, DANON, LINDSTROM, Image WEAR, ULK, NISSAN, GENSER, STORA ENSO, IKEA, VNUKOVO, PEUGEOT, MICHELIN, WIMM-BILL-DAN, Udarnitsa, ROSNEFT, TNT, DPD, EURO CEMENT and many others.

WORKWEAR FOR THE INDUSTRY

Work clothes are subjected to constant mechanical stress, pollution, stress.
And to ensure effective protection, it needs constant care, repeated washings. When choosing the material for our workwear, we pay attention to the indicators of the fabric’s resistance to abrasion (the number of cycles that it can withstand before wear) and the permissible washing temperature.

For example, oil drops are washed out at temperatures above 72 ° C, so for this it is necessary to choose a material that will not lose its color and shape as a result of washing.
Therefore, in SWG overalls made of mixed fabric , European fabrics with increased physical and mechanical properties, which have been tested for decades, are used, which have no peeling and there is the possibility of repeated, high-temperature washing.
These are the properties thanks to which SWG workwear has found its buyer in the Russian market.

IS THERE A DIFFERENCE IN BLENDED FABRICS WITH THE SAME COMPOSITION AND DENSITY?

There is also for the consumer it is very tangible, serious.

The quality of the material is determined not by the numbers indicated on the label, but by the test report and practical operating experience.

There are a lot of similar fabrics on the workwear market, with the same composition and density, at a lower price. But, this is ANOTHER fabric that does not withstand the necessary loads, in washing it shrinks above the norm, dye output, pilling. The service life of products made from it is lower than the European fabrics Milan, Indestructible, Tomboy, which we use in the production of SWG workwear.

Blended fabric that is used in the production of workwear SWG

Fabric durability:

This is due to the high fiber content of polyester, which creates a number of advantages over fabrics made from 100% cotton. The material has a very low shrinkage (no more than 2%), a high level of crease resistance, high color fastness after washing, the appearance of overalls made of fabric does not change after numerous washes.

Fabric comfort:

Ensured by the content of the optimal amount of cotton, which absorbs moisture.
The fabric has a unique 2/1 twill yarn construction that allows as much air as possible to pass through (to cool the body and facilitate the evaporation of moisture from the surface of the skin).

Industrial Laundering:

The European Textile Service Association (ETSA) has developed new, very stringent standards for industrial laundered fabric properties regarding shrinkage, pilling, tensile strength and wrinkle recovery. The fabric meets the highest requirements of all ETSA standards, which confirms the best qualities of the fabric.

Fabrics KLOPMAN and CARRINGTON (Milan, Indestructible, Tomboy) are by far the most famous and in demand in Europe and Russia for workwear.
Workwear from them is widely used in a variety of fields, such as health care, food, light and heavy industry, equipment assembly, energy, mining, transportation, trade, manufacturing workshops and automotive.

You may also like

Leave a Comment